Cisco Certifications Tutorials

39 http:\\ciscocertifications.info interface Ethernet 1 ipx network 3d interface Ethernet 2 ipx network 5c Which two statements are true? A: Traffic from network 3d for network 4a will be forwarded our e0. The access list is applied to an outgoing interface and filters outbound traffic 36. Match the IPX Frame Type with the correct IOS encapsulation? A: IPX Frame Type Cisco Encapsulation Type Ethernet_802.3 Novell-ether (Default) Ethernet_802.2 Sap Ethernet_II Arpa Ethernet_Snap Snap Token Ring Sap (Default) Token Ring_Snap Snap Fddi_Snap Snap (Default) Fddi_802.3 Sap Fddi_Raw Novell-fddi HDLC HDLC (Default) 37. Router configuration can be done by what four methods? A: Memory (NVRAM) Terminal (Console) Network (TFTP) Overwrite 38. To make a router boot from a file called FRED on the TFTP server at IP address 171.59.117.19, which command should be entered? A: Router(config)# boot system TFTP fred 171.59.117.19 39. How do you change the Auxiliary password to Cisco? A: Router(config)# line aux 0 Router(config-line)# login Router(config-line)# password Cisco 40. How do you change the Virtual Terminal password to CCIE? A: Router(config)# line vty 0 4 Router(config-line)# login Router(config-line)# password CCIE 41. How do you change the Enable Secret password to CCNA? A: Router(config)# enable secret CCNA 42. How many access-lists are possible on an interface per protocol? A: There can be only one access list for in and one for out on each interface per protocol.