49
http:\\ciscocertifications.info
A: sh sessions157.How often do servers exchange SAP information unless set otherwise?A: Every 60 seconds158.What is the default Ethernet encapsulation on NetWare 3.11?A: 802.3159.Which command would you use to see if you were receiving SAP and RIP information on an in-terface?A: sh ipx int160.Which command would you use to see if the router is hearing your server SAPs?A: sh ipx servers161.What command verifies encapsulation and layer 1 and 2 statistics of a frame relay router?A: show interface162.Which access list command will allow only WWW traffic into network 193.11.33.0?A: Access-list 101 permit tcp any 193.11.33.0 0.0.0.255 eq www163.Which of the following will show which ports have IP access lists applied?A: Show ip interface, or show running-config164.What is logged when IP access list logging is enabled?A: Source address, source port, destination address, destination port, protocol, and access list num-ber.165.Which of the following can be logged by IPX extended access lists?A: Source address, source socket, destination address, destination socket, access list number, proto-col.166.Which of the following will apply IPX SAP access list 1010 for incoming traffic?A: ipx input-sap-filter 1010167.What is the IP extended access list range?A: 100-199168.What is the extended IPX access list range?A: 900-999169.What would you enter in an IPX access list to signify any host or any network?A: -1